Reliable Support From Experts At Ab Dynamics


Need support with your AB Dynamics equipment?

AB Dynamics offer worldwide support, boasting a network of rigorously trained specialists who are kept regularly updated with the latest technologies. All our test systems are running optimally, wherever they are in the world.

You can request support on your AB Dynamics equipment from us on this page or from your local representative.

Track support

Tel: +44 (0)1225 860 275

Operating hours: 08.00 to 18.00

Email: tracksupport@abdynamics.com


Software products and releases

Find out the latest version of Track, Laboratory and Test and Monitoring software systems using the tables below.

Track Test Systems

Windows Controller Firmwares
Robot Controller - 8.15.3 PowerPMAC - 8.15.10 GST SC - 3.18
DBS - 1.34.1 LaunchPad PowerPMAC - 8.15.10 GST SC (TurboPMAC) – 2.25
Battery Monitor - 1.0.3 TurboPMAC - 8.15.4 CBAR SC (PowerPMAC) – 3.14
RC PP - 2.5.5 CBAR SC (TurboPMAC) – 3.08
Capture + Review - 1.4.0 ABD-GPS Mk II - 3.06
Router Control - 2.24 Acc103 - 213
RC Post Processor - 1.9.4 SCBS (Web browser control) 4.10
SCBS (LCD screen control) 2.8

Test and Monitoring Systems

PLATO - 7.501

Please note that AB Dynamics has identified the following issues:

A safety critical issue affecting legacy versions of its GST safety controller (version 3.10 and earlier). Users of the GST with safety controller version 3.10 and earlier should contact AB Dynamics to arrange update to the latest version at their earliest convenience.

The safety controller provides independent monitoring of the GST’s main control system and is capable of applying the brakes in the event of a fault being detected or on power failure of the GST. The identified issue can prevent the correct operation of the safety controller in the event of intermittent loss and reconnection of power to the safety controller. This issue is therefore rated as safety critical. Continued use of the GST with legacy versions of the safety controller (version 3.10 and earlier) is done at the user’s sole risk.

Software defects in the below versions which may result in unexpected steering inputs during path following:

• In legacy PowerPMAC code versions v8.4 to v8.7 inclusive, affecting users running path following tests alongside AB Dynamics' Synchro software.

• In RC versions 8.15.0 to 8.15.2 inclusive, limited to users running path following tests where a learnt run is used as a template segment.

Path following users should always follow the steps in our Path Following Safety Checklist, including running tests slowly first, stopping testing if unexpected steering responses are experienced, setting appropriate limits for allowable path following errors and setting appropriate limits for steering velocity and angle. Users with affected code should update to the latest software version as shown above.

Sign up to our newsletters